There has been some confusion on which memory is best for new motherboards based on the Intel Canterwood (875P) chip set. At this point, Corsair is recommending that people use pairs of either XMS3200C2 or XMS3500C2 modules. We are not recommending the use of XMS3200LL modules, including TwinX 'LL'. This recommendation is based on results we have received in our motherboard lab.
The results we have seen are as follows:
- Intel 875PBZ "Bonanza" board will recognize XMS3200LL modules as 333 MHz rather than 400 MHz, due to the agressive latency settings
- Asus P4C800 will recognize 3200LL correctly, but 1GB maximum memory is recommended with the low latency settings
Both boards are stable at latency settings of 2-3-2-6 rather than 2-2-2-6, as is programmed in the SPD of 'LL' parts. Therefore, we recommend that users purchase the 3200C2 (or 3500C2, for maximum overclocking performance) and tweak the latency settings through the BIOS settings, to improve the settings.
Skrevet den 16. Apr 2003. Nyheden er læst 531 gang(e).
Del med dine venner